Trend UNIBASE Universal Sub-Base for Guide Bushes (Diameter 170mm)

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity.

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers.

Features:

• Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
• Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch

Instructions for fitting:

• The line-up pin fits into the collet and is plunged through the router base 
• The line-up bush is fitted into the Unibase and secured
• This is then placed over the line-up pin and rotated in order to line up the fixing holes
• The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes
• These range from 10mm up to 30mm (GB10 - GB32)
• For larger diameter cutters a 40mm guide bush (GB40) is available
• Ideal for hinge jig and lock jig

Specification:

• Diameter: 170mm
• Thickness: 8mm
• Bore; 39mm
• Recess: 60mm
• Screw thread: 2BA