Safetrack® Crack
Infill Kit
Get everything you need in this one, handy, kit.
- 8kg overbanding resin
- 80g Catalyst
- 25kg bag of 2mm green granite
Please Note: Drawbox Sold Separately
Application Instructions
1. Clean and dry the crack or joint using oil-free compressed air.
2. Mix resin and catalyst thoroughly until uniform.
3. Pour into the crack or joint through a drawbox and level as needed.
4. Scatter the repair with aggregate while material is still wet.
5. Allow to cure (typically 10–50 minutes) before reopening to traffic.
Why Crack Infill Matters
Cracks in asphalt and concrete may seem minor, but they’re an open invitation for water ingress. Over time, this leads to freeze-thaw cycles, weakened surfaces, and costly deterioration. Safetrack® Crack Infill stops this damage before it starts.
A Smarter Seal with Chemical Precision
At the core of Safetrack® is a two-part resin system activated by a BPO (benzoyl peroxide) catalyst. When mixed, it triggers a thermosetting chemical reaction that rapidly cures the resin. The material flows into even the tiniest pores and fissures, expanding slightly as it sets to ensure full adhesion and a watertight seal.
The Result?
- A long-lasting, reinforced repair
- Blocks water ingress and freeze-thaw damage
- Withstands heavy traffic and weather extremes
- Reduces future maintenance costs
- Protects the road surface for years to come





