SHOW POTHOLES WHO’S BOSS
RETHINK YOUR ASPHALT
EZ Street is a technologically advanced, all-temperature asphalt.
It’s ready to go right out of the bag, or off the stockpile, without heat, or any special treatment.
Guaranteed
Permanent
Works in Water
& All Weather
Bonds to Asphalt
and Concrete
Instantly
Traffic-Ready
“Throw & Go”
Approved
Stockpiles
for Months
No tack
Coat required
Always
Workable
22kg BAGS | 20kg BUCKET | LOOSE BULK | BULK SACKS
Our customers apply EZ Street as a simple, cost-saving, permanent solution to a resourceful spectrum of asphalt and road work, including paving.
ALWAYS WORKABLE
- Potholes
- Utility Tracks
- Overlays
- Edge Repairs
- Manholes & Valves
- Drain Surrounds
SAVE TIME & MONEY
Permanent, all temperature, asphalt means done is done. No more hot-mix sized crews… or second trip to the patch.
Cost Comparison
Cold & Hot Mix vs. EZ Street Permanent AsphaltHOW IT WORKS
Sweep
Clear away loose debris, sand, leaves, rubber duckies, etc. (you can leave the water). Instead of building a foundation for the repair, you’re clearing one off.
EZ Street asphalt will adhere to anything solid in the pothole, but if it’s not fixed to the pavement, your repair won’t be either.
You’ll know it's ready when there’s nothing loose along the edges, or bottom of the pothole for the repair to stick to.
Fill
If the crater’s deeper than three inches, it’s a good idea to fill in two inch (50mm) layers, or “lifts”, compacting each layer before adding the next, to increase the density of the foundational layers.
Fill the pothole to just over the level of the existing pavement. Then…
Compact
If you don’t have a hand tamp, simply drive over the repair until it’s level with the pavement. And. That’s. It.
It’s 100% okay to drive on an EZ Street asphalt repair immediately after completion—we call it “secondary compaction”.
